Maritime Engineering with Industrial Placement Year and Foundation Year at University of Southampton - UCAS

University of Southampton

Degree level: Undergraduate

Maritime Engineering with Industrial Placement Year and Foundation Year

University of Southampton has participated in the Teaching Excellence Framework. These ratings were awarded in 2023, for four years.

See why these ratings were awarded

Find out more about the TEF

Course summary

This course was previously known as MEng Ship Science with Industrial Placement Year and Foundation Year. This one-year full-time course is integrated with a further five-year undergraduate degree, and will equip you with the knowledge, skills and attributes needed to successfully meet the challenges of our MEng Maritime Engineering with Industrial Placement Year degree. It is aimed at students who are highly motivated but did not choose the A level subjects required for direct entry to their chosen degree, are studying a BTEC, are an international or a mature student. Successful completion of this Foundation Year guarantees progression to one of seventeen subject areas, including Maritime Engineering. You will study full time through a combination of lectures, workshops, tutorials, and independent study, with three hours of laboratory practical work each week. You will learn the core principles of mathematics, mechanical and physical science, and electricity and electronics. You will undertake laboratory work and a variety of assignments to develop your critical thinking and problem solving and will receive full support and feedback from subject tutors to progress your academic development. The Industrial Placement Year is an additional year-long module that allows you to apply for a paid placement with an engineering-based organisation. The Industrial Placement Year will extend your time at university to five years. During your placement, you will be able to apply the knowledge and skills that you've developed during the early years of your degree, and gain vital experience to help you become a professional engineer after graduation. Please note, MEng degrees with Industrial Placement Year and Foundation Year are not available to students who require a student visa to study in the UK.

Modules

Whichever degree you are aiming for you will take these core modules: Electricity and Electronics, Engineering Principles, Coursework (including computer applications), Mathematics A and B, Mechanical Science, and Routes to Success. Specialist Science and Engineering English language module available.

Assessment method

You will be assessed through a combination of examinations and coursework activities such as formal reports and laboratory reports – all of which you will encounter as typical assessment methods throughout your degree.

Professional bodies

Professionally accredited courses provide industry-wide recognition of the quality of your qualification.

Naval Architects, Royal Institution of
Marine Engineering, Science and Technology, Institute of
Mechanical Engineers, Institution of
Engineering Council
Accreditation of European Engineering Programmes (EUR-ACE)

How to apply

31Jan

This is the deadline for applications to be completed and sent for this course. If the university or college still has places available you can apply after this date, but your application is not guaranteed to be considered.

Application codes

Course code:: H5MF

Institution code:: S27

Campus name:: Main Site - Highfield Campus

Campus code:: -

Points of entry

The following entry points are available for this course:

Foundation

International applicants

Find out about equivalent entry requirements and qualifications for your country: https://www.southampton.ac.uk/uni-life/international/your-country.page

Entry requirements

Qualification requirements

UCAS Tariff - Not accepted

A level - ABB

If you have not taken the A-Level subjects required for direct entry to your chosen course e.g. maths and normally a second science subject at A-level, then you will usually need a Foundation Year. Please refer to our website for details about subject restrictions. Pass in the associated science Practical is required where applicable. We are committed to ensuring that all students with the potential to succeed, regardless of their background, are encouraged to apply to study with us. The additional information gained through contextual data allows us to recognise a student’s potential to succeed in the context of their background and experience. Students who are highlighted in this way will receive additional scrutiny during confirmation of results

Pearson BTEC Level 3 National Extended Diploma (first teaching from September 2016) - DDD

For the BTEC National Extended Diploma, the subject must be one of: • Aeronautical Engineering • Engineering • Mechanical Engineering • Electrical/ Electronic Engineering • Manufacturing Engineering Additionally, distinctions are required in Further Engineering Mathematics and Calculus to Solve Engineering Problems modules. We do not accept any other BTEC subjects.

Access to HE Diploma - D: 30 credits M: 15 credits

Scottish Higher

We normally consider applicants who offer at least 1 Advanced Higher. Applicants presenting with only Highers will be considered on a case by case basis. Where Highers are taken over two years it might be expected that higher grades are achieved, particularly in any specific subjects required. For example, S5 – S6 (2 years): AABBB (A in specific subject) or S6 (1 year): ABBBB (A in specific subject). Unless a more advanced level (Higher or Advanced Higher) is specified in the stated entry requirements, all applicants will be required to have achieved a pass in Mathematics and English at Standard Grade, Grade 3 or National 5, Grade C, the equivalent of GCSE Grade C/ Grade 4" We are committed to ensuring that all learners with the potential to succeed, regardless of their background, are encouraged to apply to study with us. The additional information gained through contextual data allows us to recognise a learner's potential to succeed in the context of their background and experience. Applicants who are highlighted in this way will be made an offer which is lower than the typical offer for that programme.

Pearson BTEC Level 3 National Diploma (first teaching from September 2016) - DD

A typical offer is DD in the BTEC National Diploma plus B in an A-level subject. We also normally require distinctions in both of the following modules: Further Engineering Mathematics and Calculus to Solve Engineering Problems modules. If you are not sure if your qualifications meet the requirements of this course please contact our Admissions Team. A pass in the associated A-level science Practical is required where applicable.

Pearson BTEC Level 3 National Extended Certificate (first teaching from September 2016) - D

A typical offer is D in the BTEC National Extended Certificate plus AB in two A-levels If you have not taken the A-Level subjects required for direct entry to your chosen course e.g. maths and normally a second science subject at A-level, then you will usually need a Foundation Year. Please refer to our website for details about subject restrictions. Pass in the associated science Practical is required where applicable.

Pearson BTEC Extended Diploma (QCF) - DDD

For the BTEC National Extended Diploma, the subject must be one of: • Aeronautical Engineering • Engineering • Mechanical Engineering • Electrical/ Electronic Engineering • Manufacturing Engineering Additionally, distinctions are required in Mathematics for Technicians and Further Mathematics for Technicians We do not accept any other BTEC subjects.

Pearson BTEC Diploma (QCF) - DD

A typical offer is DD in the BTEC Diploma plus B in an A-level subject. We also normally require distinctions in both of the following modules: Mathematics for Technicians and Further Mathematics for Technicians. If you are not sure if your qualifications meet the requirements of this course please contact our Admissions Team. A pass in the associated A-level science Practical is required where applicable.

Pearson BTEC Subsidiary Diploma (QCF) - D

A typical offer is D in the BTEC Subsidiary Diploma plus AB in two A-levels If you have not taken the A-Level subjects required for direct entry to your chosen course e.g. maths and normally a second science subject at A-level, then you will usually need a Foundation Year. Please refer to our website for details about subject restrictions. Pass in the associated science Practical is required where applicable.

Scottish Advanced Higher

Offers will be based on exams being taken at the end of S6. Subjects taken and qualifications achieved in S5 will be reviewed. Careful consideration will be given to an individual’s academic achievement, taking in to account the context and circumstances of their pre-university education. Please see the University of Southampton’s Curriculum for Excellence Scotland Statement for further information. Applicants are advised to contact their Faculty Admissions Office for more information.

International Baccalaureate Diploma Programme - 32 points

A typical offer for the IB is Pass with 32 points overall, with 16 points required at Higher Level including 5 points in Standard or Higher Level Mathematics (Analysis and Approaches or Applications and Interpretation). Please note that we cannot accept the combination of subjects that make you eligible for direct entry to your chosen course e.g. taking both Mathematics and Physics at Higher Level. Please refer to our website for details about subject restrictions. Applications where Higher Level subjects have been studied without the full Diploma, will also be considered on a case by case basis.

Welsh Baccalaureate - Advanced Skills Challenge Certificate (last awarded Summer 2024) - B

ABB from 3 A levels or AB from two A levels including and B from the Advanced Welsh Baccalaureate Skills Challenge Certificate If you have not taken the A-Level subjects required for direct entry to your chosen course e.g. maths and normally a second science subject at A-level, then you will usually need a Foundation Year. Please refer to our website for details about subject restrictions. Pass in the associated science Practical is required where applicable.

Leaving Certificate - Higher Level (Ireland) (first awarded in 2017) - H1, H2, H2, H2, H3, H3

Cambridge International Pre-U Certificate - Principal - D3, M2, M2

GCSE/National 4/National 5

OCR Cambridge Technical Extended Diploma - DDD

OCR Cambridge Technical Diploma - DD

Typical entry criteria will be to achieve grade B in one A level subject (excluding Maths) plus Cambridge Technical Diploma in Engineering (Level 3) with overall grade of Distinction, Distinction. Additionally Distinctions are required in Maths for Engineering and Applied Maths for Engineering modules. Offers typically exclude General Studies and Critical Thinking. Pass in the associated science Practical is required where applicable.

OCR Cambridge Technical Extended Certificate - D

Typical entry criteria will be to achieve AB in two A-Levels plus Cambridge Extended Certificate in Engineering (Level 3) with Distinction Additionally Distinctions are required in both Maths for Eng or Applied Maths for Eng (if studied) If you have not taken the A-Level subjects required for direct entry to your chosen course e.g. maths and normally a second science subject at A-level, then you will usually need a Foundation Year. Please refer to our website for details about subject restrictions. Pass in the associated science Practical is required where applicable.

AQA Level 3 Technical Level (720 glh) - DD

T Level - D

Applicants must be able to demonstrate an aptitude for mathematics and may be required to take our own mathematics test. Some applicants may also be invited to attend an interview. If you are not sure whether your qualifications meet the requirements of this course please contact our Admissions Team.

Please click the following link to find out more about qualification requirements for this course

https://www.southampton.ac.uk/courses/foundation-years/engineering-physics-maths-geophysics.page#entry_requirements

English language requirements

Test	Grade	Additional details
IELTS (Academic)	6.5	with no component below 6.0

All programmes at the University of Southampton are taught and assessed in the medium of English (other than those in modern foreign languages). Therefore, all applicants must demonstrate they possess at least a minimum standard of English language proficiency.

Find out more about the University’s English Language requirements

https://www.southampton.ac.uk/studentadmin/admissions/admissions-policies/language.page

Student Outcomes

Operated by the Office for Students

There is no data available for this course. For further information visit the Discover Uni website.

Fees and funding

Tuition fees

Republic of Ireland	£9250	Year 1
International	£23620	Year 1
EU	£23620	Year 1
England	£9250	Year 1
Northern Ireland	£9250	Year 1
Scotland	£9250	Year 1
Wales	£9250	Year 1
Channel Islands	£9250	Year 1

Tuition fee status depends on a number of criteria and varies according to where in the UK you will study. For further guidance on the criteria for home or overseas tuition fees, please refer to the UKCISA website .

Additional fee information

Please see our website for further details and updates : www.southampton.ac.uk/uni-life/fees-funding.page

Provider information

Visit our website

University of Southampton
Highfield
Southampton
SO17 1BJ

Course contact details

Visit our course page

View address on Google Maps

Location	Qualification	Study mode	Duration	Start date	Apply
Main Site - Highfield Campus	MEng (Hon) - Master of Engineering (with Honours)	Full-time including foundation year	6 years	23 September 2024	Please speak to the provider to make an application	Course option 3c9b1e6f-2043-4e05-a3ab-e88100a272eb